Even though they were originally designed for the oil and gas industry in early 1970s, the designs of PDC bits have evolved rather dramatically over the years to fit the needs of several other drilling industries including horizontal directional drilling.
Read MoreThe reason why geothermal drilling is not as popular as other industries yet is the fact that hard rock, fractured formations, and high temperatures pose huge challenges for the drillers.
Read MoreOil drilling bits are essentially categorized as roller cone bits and fixed cutter bits. Like the name suggests, fixed cutter bits do not have any moving parts and thus, the cutting elements, as well as the bit body, rotate one side.
Read MoreA drill bit is the most common tool used for drilling a hole in any kind of formation, be it concrete or an underground oil or gas well
Read MoreIt is now widely Known as PDC drill bits are available in both matrix as well as steel bodies. Those who are new to the drilling industry may often get confused when it comes to deciding which one should be used when
Read MoreHole opener is a drilling tool that is widely used for increasing the size of a well bore. These are broadly categorized as fixed diameter hole openers and under-reamers..
Read MoreThanks to the never-ending research and development, direction drilling has become more economical and accurate than ever and is that is precisely why has gained extreme popularity over the years.
Read MoreThe main reason why fixed cutter drill bits have been gaining so much popularity lately is the fact that they do not have any moving parts.
Read MoreEven though modern day PDC drill bits have come a long way since their inception, top drill bit manufactures in the UK still continue to innovate in an attempt to raise the bar of expectations by achieving higher efficiency and better durability than their competitors
Read MoreThere is usually a lot of confusion around both these terms and on most occasions, they are used interchangeably without even knowing the difference.
Read MoreAny boring that doesn’t follow a vertically straight path can be categorized as directional drilling. As far as conventional drilling for gas and oil well using high-quality drilling bits is concerned, all the tools go down in a straight line.
Read MoreThe best way to extract the best performance out of a drilling bit, or any tool for that matter, is to reduce the damage. As far as working with a PDC drill bit is concerned, reducing the PDC cutter damage can go a long way.
Read MoreAs far as the metallurgical properties of the two materials is concerned, steel and matrix are complete opposites of one another. Tungsten carbide grains in matrix are metallurgically bonded to form a hard and brittle composite material which is a lot more resistant than steel and is preferred in high solid-content drilling mud.
Read MoreAll types of drilling industries have a great scope for drag bits. From environmental, exploration, and geothermal drilling to natural gas and oilfield drilling, drag bits fit in well in almost every drilling application, however, they deliver the best performance in formations that are rather soft and unconsolidated – clays, shale, and soft limestone, for instance.
Read MorePDC drill bit is the most widely used drilling tool in construction & HDD as well as the oil & gas industry. Available as matrix-body bits and steel-body bits, both have their own advantages and specifications.
Read MoreA drill bit is counted among the most important and best oil & gas drilling tools. Drill bits can either be categorized as roller cone bits or fixed cutter bits. In the following write-up, we will be talking particularly about roller cone drill bits and their design goals.
Read MoreUnlike steel drill bits manufacturers in the UK, PDC bits manufacturers keep factors such as mechanical design parameters, materials, hydraulic conditions, and properties of the rock being drilled in mind to design a bit for enhanced performance.
Read MoreA drilling bit can be defined as a tool mainly used for crushing, scraping, and grinding a formation loose. Depending upon several factors such as cutters, drilling bits can further be classified as TCI drag bits or rolling cutter bits.
Read MoreOver the years, mankind has toiled hard to come up with effective tools for making holes, however, one drilling bit - the PDC bit has been the undisputed king in the field of oil & gas ever since it came into existence. PDC bits revolutionised economical drilling.
Read MoreDrill bits come in all shapes and sizes. Right from Steel Tooth Rotary Bits to Carbide Insert Bits, and Polycrystalline Diamond Compact (PDC) Bits to Diamond Bits, drill bits are available across the drilling industry in several types.Choosing the right type of bit usually depends on two significant factors - the type of formation and the conditions in which drilling is to be performed.
Read MoreThis website is part funded by the European Regional Development Fund.
Disclaimer on use of web cookies.
